The LTC 8786 series data converter is designed to convert

 Bosch "receiver / driver and autodome RS-232 control code Protocol" into the allegiant biphasic control code. These devices are specially designed to convert a single data output from a PC based DVR (or similar device) to multiple control code outputs for operating autodome cameras. Bosch "receiver / driver and autodome RS-232 control code Protocol" is a single RS-232 data format specifically used to communicate with Bosch series receivers / drivers, autodome cameras, LTC 8786 converters and other compatible accessory devices. Users can obtain complete information about the protocol by downloading the manual from the autodome section of the following website: www.boschsecuritysystems.com 。 The input RS-232 baud rate of LTC 8786 series is fixed at 9600 baud, 1 stop bit, 8 data bit, no parity check and no handshake. Users can connect the LTC 8786 series device directly to the PC's RS-232 serial port using an industry standard modem cable. If other connection types are required, the included 9-pin d-connector can be used to easily make the interface cable. Certification and accreditation body certification EMC immunity en50130-4 EMC radiation en55022-1, FCC Part 15, class a safety converter CE, LVD 73 / 23 / EEC power adapter CE, UL, CSA, TUV

Sales telephone (same number of wechat): 13428785305 QQ: 2461903042