Through a shielded cable, MIC series composite cable

 provides all power, video and remote control line connections between MIC series cameras and Mic series power supply units. These high-quality cables are designed to maximize flexibility while maintaining properties such as strength and ductility. Each cable is mounted at one end through an IP67 socket female connector that connects to a male connector that shields the camera base. This provides a reliable, easy to install, common connection for all mic series cameras. The other end of the cable has a separate / empty (not terminated) conductor for quick installation to the terminals in the mic power supply unit to connect to the relevant control equipment and power supply. The cable shield is connected to the metal cable gland to ensure minimum EMC interference. The outer sheath of the cable is UV resistant. To provide maximum protection, Bosch recommends that you embed the cable in a permanently grounded metal conduit. Specifications 12 pin cable (for all mic cameras except current thermal imaging cameras) cable length * 2m (6.56ft) 10m (32.81ft) 20M (62.62ft) 25m (82.02ft) cable diameter 8mm (0.30in) cable weight 2m: 0.3KG (0.66lb) 10m: 0.5kg (1.10lb) 20m: 0.95kg Kg (2.09 lb) 25m: 3.3kg (7.28lb) video cable resistance 75 ohm connector diameter 25 mm (0.98 inch) connector IP67, 12 pin female sleeve type operating temperature range - 40 ° C to + 80 ° C (- 40 ° f to + 176 ° f) storage temperature range - 55 ° C to + 85 ° C (- 67 ° f to + 185 ° f) sheath material nhfr037 environmental regulations / standards UL Approved components AWM style 21456 VW-1 rating (UL 1581 part 1080) sunlight resistance test (UL 1581 part 1200) compatibility mic550 / mic550ir mic500 mic440 mic400 mic412

Sales telephone (same number of wechat): 13428785305 QQ: 2461903042